Size hockey jerseys with the player wearing shoulder pads, elbow pads and pants, not over a T-shirt. The jersey should pull on without catching on the pad caps, let the arms reach straight overhead, cover the top of the pants and leave sleeves ending at the glove cuff. Goalies need a goalie-cut jersey, usually one size bigger. Our custom hockey jerseys start at $19.36 each for 12–20 pieces.
Why hockey jersey sizing is different
Most team jerseys are sized to the body. Hockey jersey sizing is about the body plus the gear underneath it. Shoulder pads add width and height at the top, elbow pads add bulk at the arm, and the jersey has to hang over the top of the hockey pants without riding up when a player reaches for a puck. A jersey that fits perfectly over a T-shirt will feel tight and short once the pads go on.
The other twist is that hockey players grow out of gear and jerseys at different times. A bantam who moves up a pad size in October may suddenly need the next jersey size too. If you size for the pads players will wear in midseason, not the pads they wore last spring, you will order fewer replacements.
This guide walks you through measuring in gear, the fit checks that matter, how to handle goalies, and how to turn your findings into an order.
Step 1: Measure players in full gear
Ask every player to bring shoulder pads, elbow pads and pants to one practice. Measuring in gear takes about 30 seconds per player and saves weeks of exchanges.
Take three numbers with a soft tape measure and write them next to the player's name on your roster sheet. Use inches first, then cm, so you can match them to our size charts.
- Chest over pads: wrap the tape around the widest point of the shoulder pads and chest, under the arms.
- Sleeve: with the arm out to the side and the elbow pad on, measure from the center of the back of the neck to the wrist.
- Length: measure from the base of the neck at the back down to the top of the hockey pants, then add enough to overlap the pants.
Step 2: The four fit checks over pads
Numbers get you close. The fit checks below confirm it. Ideally, have a size sample on hand so players can try it on in gear. When we send your pre-production sample, use it the same way.
| Check | How to test it | Good fit | Size up if |
|---|---|---|---|
| Shoulders | Pull the jersey on over shoulder pads | Slides over the pad caps without catching | The collar or shoulders stretch tight over the pads |
| Reach | Raise both arms straight overhead | Hem stays over the top of the pants | The hem lifts above the pants or the back pulls tight |
| Sleeves | Hold arms straight out in front with gloves on | Cuff reaches the glove cuff | Cuffs ride up the forearm |
| Length | Stand in a ready stance | Covers the pant waist all around | Any skin or base layer shows at the waist |
| Too big | Skate a few strides | No loose fabric flapping at the elbows | Size down if the sleeves cover the gloves or the hem hangs past mid-thigh |
Step 3: Size goalies on their own
Goalies wear a chest protector and arm guards that are far bulkier than skater pads, so a regular jersey in their usual size will not fit. Order a goalie-cut jersey, which is cut wider through the body and arms. If you are not sure, have the goalie try a skater jersey one or two sizes up over the chest protector and run the same four checks.
List goalies separately on your roster sheet and flag them when you request your mockup, so sizes and number placement are checked against the larger garment before anything is printed.
Step 4: Handle youth, adult and growth
Youth and adult hockey jerseys are cut on different patterns, not just in different sizes. For mixed teams, such as a 14U roster where some players already wear adult pads, size each player on the pattern that fits their gear. Sizes can be mixed freely within one design, so a single order can cover youth large through adult XL.
For players between sizes, choose the bigger one. A slightly loose jersey still looks right on the ice, while a tight one restricts reach and wears out at the seams. The exception is your smallest players: a jersey that hangs past the knees can catch skates on the bench, so size down for very young skaters.
Numbers and colors to plan before you order
Size also affects number layout. The 2019-20 NFHS ice hockey uniform rules require Gothic numbers at least 10 inches high on the back and at least 4 inches high on both sleeves, in a color that contrasts with the jersey. The same rules require visiting teams to wear dark jerseys and home teams to wear white or light jerseys, and captains and alternates to wear a contrasting C or A on the left front shoulder. The 2024-25 NFHS, NCAA and USA Hockey rules comparison shows USA Hockey (high school and below) has no rule requiring a number beyond the back one, while NFHS requires both sleeves.
On small youth jerseys, a 10-inch back number takes up most of the back panel, so leave room for a name bar above it. A free mockup shows the layout on your actual sizes before you approve. If your league follows NFHS rules, order a home jersey and an away jersey, or look at a reversible practice jersey for scrimmages.
Turning your sizes into an order
Once you have the numbers, count how many players sit in each size and add one or two spares in the most common sizes. Spares cover a lost jersey, a player who grows, and a midseason call-up.
Our custom hockey jerseys use 220-260 gsm air-knit polyester and start at $19.36 each for 12–20 pieces, or $16.00 at 51–100. Uniform sets start at $29.55. Pricing includes sublimated names, numbers and logos, express shipping and US import duty. The minimum is 12 pieces per design on a first order, and reorders have no minimum, so a single replacement jersey is never a problem.
If this is your first custom order, our step-by-step guide on how to order custom team uniforms and our general team sizing guide cover the rest of the process.