Quick answer

Sublimated jerseys have the design dyed into polyester fabric, so colors never crack or peel and any design is possible. Screen printed jerseys have ink layered on top of the fabric, which suits simple one or two color designs and cotton blends. For game jerseys in polyester, sublimation is usually the better choice, and with us names and numbers on sublimated garments are included from 12 pieces.

The short answer

Coaches ask about sublimated vs screen printed jerseys more than almost any other design question, and the honest answer is that both methods work. They just suit different jobs. Sublimation dyes the design into the fabric. Screen printing lays ink on top of it. That one difference drives almost everything else: how the jersey feels, how long the graphics last, which fabrics you can use and what the design can look like.

The table below sums it up. The rest of this guide explains each point and ends with a simple way to decide.

Sublimation compared with screen printing for team jerseys
Factor Sublimation Screen printing
How the design is applied Dye is turned to gas by heat and bonds into polyester fibers Ink is pushed through a mesh screen onto the fabric surface
Fabric Polyester or high-polyester fabric, printed from white Cotton, blends and polyester, any base color
Number of colors No practical limit, including gradients and photos One screen per color, so simple designs work best
Feel No added layer; the fabric feels the same A layer of ink you can feel, heavier with big prints
Durability Cannot crack or peel because it is part of the fiber Can crack or fade with heat, stretching and many washes
Breathability Fabric stays as breathable as it was Large solid prints reduce airflow in that area
Best for Game jerseys, reversibles, all-over designs Fan tees, cotton practice shirts, simple one color logos

How sublimation works

Your design is printed onto transfer paper with sublimation inks. The paper is pressed against white polyester fabric under heat and pressure. The heat turns the ink into a gas, which bonds with the polyester fibers, and when it cools the color is locked into the fabric. The panels are then cut and sewn into jerseys.

Because the color sits inside the fiber, there is nothing on the surface to crack, peel or wash off. A sublimated number feels exactly like the rest of the jersey. That is why most modern basketball, soccer, volleyball and baseball game jerseys are sublimated.

In our factory this runs on four Mimaki JV300-160 dye-sublimation printers, two roll-to-roll rotary heat-transfer presses and a 64 x 54 inch flat press, all in-house. You can read more on our decoration methods page.

  • Sublimation only works on polyester or high-polyester fabric. It does not bond with cotton.
  • The base fabric is white, and every color is dyed onto it. You cannot sublimate white or light ink onto a dark fabric, but you can print the whole panel dark and leave white areas unprinted.
  • Seams and folds can show slight white lines if panels are not pressed flat, which is why cut-and-sew after printing gives the cleanest result.

How screen printing works

Screen printing pushes ink through a fine mesh screen onto the garment. Each color in the design needs its own screen, lined up one after another. The ink is then cured with heat so it stays on the fabric surface.

Screen printing is a proven method and works on almost any fabric color, including dark cotton. It is a good fit for one or two color logos on fan shirts, practice tees and hoodies. Where it struggles is with large, multi-color designs on stretchy performance fabric. Thick ink adds weight, blocks airflow and can crack as the fabric stretches and is washed over a season.

Rules can limit sublimated designs

Sublimation lets you put anything anywhere, but high school rules do not. Under NFHS basketball rules, the torso of the jersey must be a single solid color with no designs in the fabric, white for home and a dark contrasting color for away. Patterns and color are allowed only above the neckline line, in side inserts up to 4 inches wide and in armhole trim up to 1 inch. A full camo or gradient body is fine for an AAU or rec team but not for a varsity game.

NFHS football has similar limits: the visiting jersey body must be white, and numbers must be a single solid color that clearly contrasts with the jersey body. NFHS soccer requires the visiting team to wear solid white with no colored trims. So if you play under a state association, design the sublimated jersey to the rule book first, then add style where the rules allow it. Our guide to NFHS basketball uniform rules has the full list.

Fabric matters as much as the print

Because sublimation needs polyester, the fabric choice and the print method go together. Basketball uniforms are usually polyester micromesh or bird-eye mesh, which breathe well and take dye evenly. Soccer jerseys are commonly bird-eye or interlock. Baseball and softball jerseys use micro polyester interlock, which has a smoother, slightly heavier face that suits button-front styles. Each of these sublimates well.

Screen printing gives you more fabric freedom, which is why it still leads for cotton tees and heavy fleece. If a player has a cotton sensitivity or your program wants a classic cotton warm-up shirt, screen print is the practical route. Our materials page lists the fabrics we use and what each one is good for.

Cost: where each method makes sense

Screen printing costs depend on how many colors and print locations you have, because each color needs a screen. Sublimation costs the same whether the design has one color or twenty, because the whole panel is printed at once.

With us, the price per piece already includes your design and team colors, logos, names and numbers on sublimated garments, with no setup, art or screen fees. For example, a sublimated basketball game uniform with jersey and short starts at $33.54 per set at 12 to 20 sets, and a sublimated soccer match jersey starts at $16.94 per piece. Full ladders for every tier are on our pricing page. If you want screen printing, embroidery or tackle twill instead, ask for a quote on that method.

How to choose for your team

Use these quick rules of thumb:

  • Game jerseys in polyester: choose sublimation for durability, light weight and full color.
  • Reversible jerseys: sublimation, since both faces are printed and there is no ink layer to stiffen the double fabric. See our reversible basketball jerseys guide.
  • Cotton fan shirts and team tees: screen printing.
  • A classic stitched look on baseball or football: tackle twill or embroidery, which sit on top like screen print but are sewn on.
  • A one color logo on a hoodie or polo: screen printing or embroidery both work well.

Seeing it before you commit

The easiest way to decide is to see your own design both ways. We draw a free mockup in your colors, with unlimited revisions, and then make a pre-production sample in about 10 days so you can feel the fabric and check the print. The sample cost is credited against your bulk order, and the minimum is 12 pieces per design. Once you approve the sample, your uniforms are delivered in about 3 weeks.

Sources

  1. Dye-sublimation printer (Wikipedia)
  2. Screen printing (Wikipedia)
  3. NFHS Basketball Legal Uniforms (NFHS presentation, hosted by NCHSAA)
  4. 2025 NFHS Football Jersey and Pant Rules
  5. NFHS Soccer Uniforms