Most team uniforms use one of four polyester-based fabrics: mesh for airflow (basketball, lacrosse), smooth interlock for a clean jersey face (baseball, soccer), poly-spandex for stretch and close fit (volleyball, wrestling, base layers) and double-knit for durable pants. Weight is measured in GSM, grams per square meter; our game jerseys run from 130 to 260 gsm depending on the sport.
Why the fabric matters more than the logo
Two jerseys can look identical in a mockup and feel completely different on a player. One breathes on a hot gym floor, the other clings. One survives a season of slides, the other pills by October. With uniform fabrics explained in plain terms, you can choose the right material for your sport instead of picking whatever looks best in a catalog photo.
Almost every modern team uniform is made from polyester or a polyester blend. Polyester holds dye-sublimated color well, dries quickly and keeps its shape. What changes from sport to sport is how the yarn is knitted, how heavy the fabric is and whether spandex is added for stretch.
What GSM means
GSM stands for grams per square meter. It is the weight of one square meter of fabric, and it is the simplest way to compare thickness. A lower number means lighter and usually more breathable fabric. A higher number means heavier, more opaque and often more durable fabric.
GSM is not the whole story. A 150 gsm mesh and a 150 gsm interlock weigh the same but feel very different, because mesh has open holes and interlock is a closed, smooth knit. Use GSM to compare fabrics of the same type, and use the fabric type to decide on feel.
The main uniform fabrics side by side
Here is how the fabrics we use compare, with the weights listed in our own product specifications.
| Fabric | How it is built | Feel | Our weights | Typical uses |
|---|---|---|---|---|
| Polyester micromesh | Fine knit with tiny open holes | Light, smooth, airy | 130-150 gsm | Basketball jerseys and shorts |
| Bird-eye mesh | Knit with a small diamond-shaped hole pattern | Light, textured, breathable | 130-150 gsm (basketball), 135-150 gsm (soccer) | Basketball, soccer |
| Micro polyester interlock | Double-layer knit, closed face | Smooth, soft, slightly heavier | 140-160 gsm | Baseball and softball jerseys, soccer |
| Poly-spandex jersey | Polyester knit blended with spandex (elastane) | Stretchy, close-fitting | 180-200 gsm (volleyball), 220-240 gsm (singlets), 220 gsm 88% poly / 12% elastane (base layers) | Volleyball, wrestling, compression |
| Double-knit polyester | Two interlocked layers, dense | Firm, durable | 240 gsm at seat and knee | Baseball and softball pants |
| Air-knit polyester | Heavier polyester knit | Substantial, holds its shape | 220-260 gsm | Hockey jerseys |
Mesh: bird-eye and micromesh
Mesh is the go-to fabric when airflow matters most. The open structure lets heat escape, which is why it is the standard for indoor sports like basketball. Polyester micromesh has very small holes and a smooth face that takes fine sublimated detail well. Bird-eye mesh has a slightly larger, textured hole pattern that many players find cooler against the skin.
Our basketball uniforms use 130-150 gsm micromesh or bird-eye, and our lacrosse sleeveless jerseys use 150 gsm polyester mesh. Mesh is light, so on white or pale colors, ask to see a fabric swatch or sample if you are worried about show-through.
Interlock: the smooth, classic jersey face
Interlock is a double-knit structure with a closed, smooth surface on both sides. It drapes nicely, feels soft and gives sublimated graphics a crisp, even look. It is slightly heavier than mesh at the same thickness, and it hides undergarments better.
That combination makes micro polyester interlock a strong choice for baseball jerseys, where a clean button-front look matters, and for soccer kits that need to look sharp in photos. Our baseball jerseys use 140-160 gsm interlock, and our soccer jerseys use 135-150 gsm bird-eye or interlock.
Poly-spandex: stretch and recovery
Adding spandex to polyester gives a fabric that stretches and snaps back. That is essential for garments that must fit close without restricting movement: volleyball jerseys, wrestling singlets, compression shirts and base-layer shorts. You may see the stretch fiber listed as spandex or elastane on a label. The FTC allows either name in the US; elastane is the international term.
Weight changes with the job. Our volleyball jerseys use 180-200 gsm poly-spandex for a fitted but breathable match top. Our wrestling singlets use a heavier 220-240 gsm poly-spandex because they take more pulling and need full coverage. Base layers use 220 gsm with 88% polyester and 12% elastane. Spandex is more sensitive to high heat than plain polyester, so these garments especially benefit from low-heat drying.
Double-knit polyester: built for slides
Double-knit polyester is a dense, two-layer knit. It resists tearing and abrasion better than lighter fabrics and holds its shape, which is why it has been used for baseball and softball pants for decades. Our game pants use 240 gsm double-knit polyester at the seat and knee, the two places that take the most punishment from slides and dives.
Fleece and French terry for off the field
Warm-ups and team hoodies are a different category. Our esports hooded pullover, for example, comes in 280 gsm French terry (80% cotton, 20% polyester) or 380 gsm brushed fleece (65% cotton, 35% polyester). These cotton-rich fabrics feel warm and soft, but they do not suit full sublimation the way polyester does, so they are usually decorated with embroidery, screen print or DTF. Our decoration methods page explains the options.
How to choose: a quick decision guide
Match the fabric to how the garment is used, not just to how it looks on screen.
- Indoor, high-sweat sports where airflow is key: mesh
- Classic jerseys that need a smooth, opaque face: interlock
- Close-fitting garments that must stretch and recover: poly-spandex
- Pants that take slides and dives: double-knit polyester
- Cold-weather warm-ups and fan gear: French terry or brushed fleece
Reading the fabric label
Under the FTC's textile labeling rules, US garment labels must list generic fiber names and their percentages by weight, from largest to smallest, and imported products must name the country where they were made. In general, fibers under 5% of the weight do not have to be named, and there is a 3% tolerance on stated percentages. So a label reading 88% polyester, 12% spandex tells you exactly what you are buying.
When you request a free mockup, tell us the sport and how the uniform will be used, and we will recommend a fabric. Your pre-production sample, ready in about 10 days, lets you feel the actual fabric before the full order is made. See all the options on our materials page, and keep them looking good with our jersey care guide.