Under NFHS Rule 4-1-1, a high school wrestler may compete in a one-piece singlet or a two-piece uniform made of a school-issued form-fitted compression shirt plus compression shorts or shorts designed for wrestling. The shirt cannot reach past the elbow and needs at least a 3-inch tail, and the shorts need at least a 4-inch inseam that stays above the knee. Custom sublimated team singlets start at $22.87 each for 12–20 pieces.
The short version of the wrestling singlet rules
High school wrestling singlet rules come from NFHS Rule 4, Section 1, and your state association can add its own requirements on top. The core idea is simple: every wrestler on the mat must wear a legal uniform, and there are now two legal ways to build one. The first is the classic one-piece singlet. The second is a two-piece uniform, which NFHS approved starting with the 2017-18 season.
Most programs still wear singlets for duals and tournaments, but the two-piece option matters for wrestlers who want more coverage, for growing middle school rosters, and for girls programs that are adding athletes every year. If you understand both options before you design, you can order once and stay legal all season.
Below we cover what each piece must look like, the details that trip up first-time buyers, and how to order a custom team singlet that passes a referee's check at weigh-ins.
Singlet vs two-piece: what NFHS allows
The table below sums up the two legal uniform options under the current NFHS rule and interpretations. Always check your state association's handbook too, because some states publish stricter or more detailed versions.
| Item | One-piece singlet | Two-piece uniform |
|---|---|---|
| Top | Part of the singlet | Form-fitted compression shirt, school-issued |
| Sleeve length | Sleeveless singlet cut | Must not cover or extend below the elbow |
| Shirt tail | Not applicable | Minimum 3-inch tail |
| Bottom | Part of the singlet | Compression shorts or shorts designed for wrestling |
| Inseam | Not applicable | At least 4 inches, not below the knee |
| Banned hardware | None on the garment | No exposed drawstrings, belt loops, zippers, snaps, buttons or pockets |
| Undergarment | Suitable undergarment covering buttocks and groin | Same, required under both short types |
| Long-sleeve shirt | Not part of the uniform | Only with state association permission |
Rules for the one-piece singlet
A singlet is the default legal uniform. NFHS requires it to be school-issued, and the wrestler must wear a suitable undergarment that completely covers the buttocks and groin. Female wrestlers must also wear a sports bra that completely covers the breasts. Since the 2022-23 rule clarification, a compression shirt under the singlet is permitted for female wrestlers but not required unless it is needed for full coverage.
Tights are allowed, but not on their own. The 2025-26 NFHS interpretations confirm that tights must be worn under a one-piece singlet, compression shorts or shorts designed for wrestling. Socks are treated as special equipment, not as part of the uniform.
- School-issued singlet for every wrestler on the roster
- Suitable undergarment under the singlet
- Sports bra for female wrestlers; compression shirt optional unless needed for coverage
- Tights only underneath a singlet or legal shorts, never alone
Rules for the two-piece uniform
The two-piece option pairs a compression shirt with compression shorts or shorts designed for wrestling. The shirt must be form-fitted, school-issued, end at or above the elbow and have at least a 3-inch tail so it stays tucked during scrambles. A long-sleeve compression shirt is not legal as part of the uniform unless your state association has granted permission under Rule 1-1-2.
The shorts need a minimum 4-inch inseam that does not extend below the knee. Shorts designed for wrestling need an elastic waistband. Neither style can have exposed drawstrings, belt loops, zippers, snaps, buttons or pockets, and a suitable undergarment is required underneath. That rules out ordinary athletic shorts with a tie cord or side pockets.
If you plan to offer both options, design the fight shorts and the short-sleeve compression shirt in the same colorway as your singlet, so a mixed lineup still looks like one team.
Names, logos and flags on the uniform
Decoration is where many custom orders go wrong. Under the current rule, any manufacturer logo on the wrestling uniform, including a legal hair cover, can be no more than 2 1/4 square inches with no dimension over 2 1/4 inches, and it may appear only once on each item. The American flag is the only flag allowed. A commemorative or memorial patch needs state association approval.
The 2025-26 interpretations say there is no size limit on the school name, nickname, logo or mascot. A wrestler's personal nickname may not appear on the uniform. Starting July 1, 2027, NFHS also permits the weight classification and the wrestler's name on the top and/or bottom, which opens the door to personalized singlets for programs in states that follow the change.
Our advice: put the school name and mascot large, keep the manufacturer mark small, and hold off on wrestler names until your state confirms the 2027 language. A free mockup lets you see the full layout front and back before anything is printed.
Weigh-ins and the legal uniform
Since the 2020-21 season, NFHS has required wrestlers to weigh in wearing a legal uniform and a suitable undergarment, without shoes or ear guards, and no extra weight allowance is given for the uniform. If a compression shirt is part of a wrestler's legal uniform, the wrestler weighs in wearing it. That means lightweight fabric and a correct fit matter for more than comfort.
Our team singlets use 220-240 gsm poly-spandex. It stretches and recovers well, and a dye-sublimated design adds no weight because the ink becomes part of the fabric instead of sitting on top of it. Read more on that process in our sublimated vs screen printed jerseys guide.
What about freestyle and Greco-Roman?
Folkstyle is what most US high school and middle school programs wrestle. International styles follow United World Wrestling (UWW) uniform regulations, which use singlets with red or blue markings and ask national teams to have both a red-marked and a blue-marked singlet. If your club travels to freestyle or Greco-Roman events, read the event's uniform rules before you order. Many clubs simply buy a red and a blue singlet, or design the club singlet so it can sit next to either color.
How to order legal custom singlets
Start with your roster and your state association's handbook. Then decide whether you are ordering singlets only, or singlets plus a two-piece option for wrestlers who want it. Most programs order a singlet for every wrestler and a smaller run of two-piece sets.
Sizing is the next step. Singlets fit close, so use the measurements on our size charts rather than a wrestler's T-shirt size, and read our guide on how to size a team uniform order. Sizes can be mixed freely within one design.
Our wrestling singlets start at $22.87 each for 12–20 pieces and drop to $18.90 at 51–100. The price includes your design, team colors, logos, names and numbers, express shipping to your door and US import duty. The minimum is 12 pieces on a first order, with no minimum on reorders, which helps when a freshman joins midseason. You get a pre-production sample in about 10 days, and your order is delivered in about 3 weeks after you approve the sample.
Sources
- NFHS: Wrestling Rules Changes 2022-23
- NFHS: Wrestling Rules Interpretations 2025-26
- NFHS: Wrestling Rules Changes 2025-26
- OSAA: NFHS Wrestling Legal Uniform (Rule 4-1-1)
- Athletic Business: Uniform Changes for High School Wrestling Approved
- Formula4Media: Uniforms part of NFHS wrestling rules changes
- United World Wrestling: Uniform Regulations